收藏本站
Table 3. Pin Assignments
PIN
PIN NAME
MSL2161 MSL2160
PIN DESCRIPTION
12
46
47
48
49
50
51
52
53
54
55
56
PHI
GSC
PWM
EN
VIN
VDD
S0
G0
D0
S1
G1
PHI
GSC
PWM
EN
VIN
VDD
S0
G0
D0
S1
G1
Phase synchronization input
Drive PHI with an external signal from 40Hz to 10kHz to synchronize the MSL2160/1 clock.
PHI is typically driven with the VSYNC signal.
Gate shift clock input
Drive GSC with the gate shift clock of the video signal, from to MHz.
GSC is typically driven with the HSYNC signal.
PWM input
PWM allows external control of the brightness of all LED strings.
Drive PWM with a pulse-width modulated signal with duty cycle ranging from 0% to 100% and
frequency up to 5kHz. When not configured as an input, PWM is high impedance.
Enable input (active high)
Drive EN high to turn on the MSL2160/1, drive EN low to turn off the MSL2160/1.
For automatic start up, connect EN to VIN.
When EN is low the entire device, including the serial interface, is turned off.
Driving EN high initiates a boot load of the EEPROM data into the control registers,
simulating a cold start up.
Supply voltage input
Connect a 12V ±10% supply to VIN. Bypass VIN to GND with a 10μF
ceramic capacitor placed close to VIN.
2.5V internal LDO regulator output
VDD powers internal logic.
Bypass VDD to GND with a 4.7μF ceramic capacitor placed close to VDD.
Source sense input 0
Source sense input for external MOSFET 0.
Connect S0 to the source of the external MOSFET and to the current sense resistor for LED string 0.
The full-scale LED current threshold is reached when 500mV is across the current sense resistor.
If unused, connect S0 to ground.
Gate output 0
Gate drive output for external MOSFET 0.
Connect G0 to the gate of the external MOSFET driving LED string 0.
If unused, leave G0 unconnected.
Drain sense input 0
Drain sense input for external MOSFET 0.
Connect D0 through a 10M? resistor to the drain of the external MOSFET driving LED string 0.
If unused, connect D0 to ground.
Source sense input 1
Source sense input for external MOSFET 1.
Connect S1 to the source of the external MOSFET and to the current sense resistor for LED string 1.
The full-scale LED current threshold is reached when 500mV is across the current sense resistor.
If unused, connect S1 to ground.
Gate output 1
Gate drive output for external MOSFET 1.
Connect G1 to the gate of the external MOSFET driving LED string 1.
If unused, leave G1 unconnected.
Atmel LED Drivers-MSL2160/MSL2161
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
MSL2162DQ IC LED DRIVER 16 STRING
MSL3082CS IC LED DRIVER 8 STRING
MSL3085BT IC LED DRIVER 8 STRING
MSL3162BT IC LED DRIVER 16 STRING
MSL3164BT IC LED DRIVER 16 STRING
MSL3167GU IC LED DRIVER 16 STRING
MT-6 PLUS SURGE SUPPR TCHMSTR 6OUT 10'CORD
MT42L256M32D4KP-3 IT:A IC LPDDR2 SDRAM 8GBIT 168FBGA
相关代理商/技术参数
MSL2160DQ-R 功能描述:LED照明驱动器 16String White & RGB LED Drivers with A RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
MSL2161 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:16-string, White and RGB LED Drivers with Adaptive Configuration, EEPROM, and SPI/I2C/SMBus Serial Interface
MSL2161DQ 功能描述:LED照明驱动器 16String White & RGB LED Drivers with A RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
MSL2161DQ-R 功能描述:LED照明驱动器 16String White & RGB LED Drivers with A RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
MSL2162DQ 功能描述:LED照明驱动器 16-String RGBWhite LED Dvrs AdapCon E2P RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
MSL2162DQ-R 功能描述:LED照明驱动器 16String White & RGB LED Driver with Ad RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
MSL2164-DU 功能描述:LED照明驱动器 16-String LED Driver Mult-PWM Modes 3FO RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
MSL2164-DUR 功能描述:LED照明驱动器 16-String LED Driver Mult-PWM Modes 3FO RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N